Every claim we make about capacity, compliance or testing has an issued document behind it. This page puts those documents in one place: the three management-system certificates, our 2026 amfori BSCI social audit, the product-compliance test reports, and photographs of the production floor the reports describe. Each image below is the actual document, not a rendering, and each certificate number can be checked with the issuing body without asking us for anything.
The plant has been in operation since 2009. Every document on this page is issued to the same legal entity and the same site, so a buyer can verify any of them without needing a second company name.
ISO 9001, ISO 14001 and ISO 45001 are held by the legal entity that signs your purchase order — Jiangxi Chengleke Leather Co., Ltd., unified social credit code 91360824MA3986M19W. All three were issued by CFL Certification Center (CNAS C065-M, an IAF MLA signatory) on the same three-year cycle.
| Certificate | Registration number | Scope | Valid |
|---|---|---|---|
| ISO 9001:2015 — quality management | 06526Q02816R001 | Production of luggage and bags | 28 Sep 2026 – 27 Sep 2029 |
| ISO 14001:2015 — environmental management | 06526E01353R001 | ||
| ISO 45001:2018 — occupational health and safety | 06526S01270R001 |
These are management-system certificates, not product certificates. They describe how the factory is run — document control, corrective action, environmental and safety management — and they say nothing about whether a particular suitcase passed a particular test. Product compliance is a separate set of documents, further down this page.
Our most recent social audit was a full amfori BSCI audit carried out on 3–4 September 2026 by TÜV Rheinland at our site in Xingan County, Ji'an City, Jiangxi Province. It covered 64 employees, with 12 workers interviewed privately. The report carries amfori monitoring ID 26-0430021 and is retrievable on the amfori Sustainability Platform by any registered member buyer.
Ten of the thirteen performance areas were rated A, including every area covering child labour, forced labour, discrimination and precarious employment. The overall site rating is C, pulled down by two areas where our administration had not kept pace with our order volume: decent working hours (PA6, rated D) and fair remuneration (PA5, rated B). We publish the section table instead of a highlight reel, because a buyer doing due diligence will read the D anyway.
Read the full 2026 BSCI section-by-section breakdown →
Product-level compliance is evidenced by test reports from accredited third-party laboratories. The table lists what each document covers; the scans beneath it are the certificates as issued.
| Document | What it covers | Issued |
|---|---|---|
| REACH | Annex XVII certificate and test report covering 251 restricted substances, Candidate List version dated 5 November 2025 | 2025 |
| RoHS | EU RoHS 2, Directive 2011/65/EU — 10 restricted substances in non-metallic materials | Aug 2025 |
| CPSIA / CPC | Children's Product Certificate and test report to 16 CFR 1500 and 1501 | Jan 2026 |
| EMC | EN 55032 and EN 55035, finished luggage with integrated electronics | 2025 |
| EU GPSR | Authorised representative registration under Regulation (EU) 2023/988 | 29 Aug 2025 |
| Germany VerpackG | LUCID producer registration for packaging placed on the German market | 19 Mar 2025 |
Two things to keep in mind when you read reports like these, ours or anyone else's. A REACH certificate is only as current as its list version — the SVHC Candidate List is revised during the year, so ask for the date on the report, not just the page that says REACH. And there is no such thing as “REACH certified”: REACH sets obligations and thresholds, not a certification. A supplier who says they are REACH certified has told you they do not understand the regulation.
Wheel, handle, drop and temperature testing runs in-house on the same production floor the audit describes, so a drifting process is caught before a container is loaded rather than after. In-house testing is a process control; it does not replace the third-party reports above and we do not present it as if it did.
What we test: wheel rolling and endurance, handle pull and load, drop impact, and temperature and humidity cycling on shells and linings. Pass criteria are agreed with you in the QC file at order confirmation, so the test bench is checking your specification rather than a generic one.
The site totals 33,000 m² in Ji'an, Jiangxi, of which 4,672 m² is the production floor covered by the 2026 BSCI audit. Mould making, shell extrusion, hot-press forming, assembly and packing all take place inside that floor — which is why the audit scope and the production scope can be stated as the same area rather than two different numbers chosen for effect.
Our certification verification guide walks through each document type with the exact wording to request from any supplier, ours included, and the REACH report guide shows the four checks that expose a recycled or out-of-scope test report.
On request, together with any quotation: the three ISO certificates as PDF, the current amfori BSCI summary report, REACH and RoHS test reports for the materials in your specification, and the full CPSIA package if the order includes children's products. Ask for the document pack when you send your specification — we would rather you check than take our word for it. The capacity, lead time and MOQ figures behind these documents are on the factory facts page, and the wider certification landscape is covered in our guide to factory certifications.